Welcome, Guest. Please login or register.

Username: Password:

Author Topic: problem with driver  (Read 3826 times)

bojan

  • Full Member
  • ***
  • Posts: 12
    • View Profile
problem with driver
« on: January 24, 2016, 04:12:23 »

Hi guys,
I have a problem with ASCOM driver, I can't install it.
However the whole thing still works, if I choose EQMOD ASCOM HEQ5/6...
What could be the problem here?
Thanks i advance!
Bojan
Logged

TCWORLD

  • Administrator
  • *****
  • Posts: 809
    • View Profile
    • AstroEQ
Re: problem with driver
« Reply #1 on: January 24, 2016, 06:23:17 »

Are you using an Arduino Mega? If so, then you don't need the AstroEQ driver - you can just use the Arduino one which shows as being installed in your screenshot. The AstroEQ driver is only for versions of AstroEQ using a PIC18F14K50 as the USB-Serial IC (basically any I sell). The driver is only to enable AstroEQ to show up as a COM port so EQMOD can detect it.

In ASCOM, you should select the EQMOD ASCOM driver as you have.
Logged
Tom Carpenter (AstroEQ)

bojan

  • Full Member
  • ***
  • Posts: 12
    • View Profile
Re: problem with driver
« Reply #2 on: January 24, 2016, 21:23:17 »

Yes, it is Arduino Mega.

Thanks!
Bojan
Logged