Welcome, Guest. Please login or register.

Username: Password:

Author Topic: Quiet EQMOD Slews, Loud GOTO's  (Read 3044 times)

cuivenion

  • Sr. Member
  • ****
  • Posts: 73
    • View Profile
Quiet EQMOD Slews, Loud GOTO's
« on: March 05, 2016, 05:21:20 »

HI again, I've finally got my Astroeq up and running. I've been playing with it indoors to get used to it and discovered when I slew with EQMod that there is just a quiet whine from the motors, even at 800x speed.

When I goto using Stellarium it is much louder even when I have the goto speed 100x. I'm testing the mount unloaded for now. The best way to descibe this sound is vibration/rattle.Is there anything I can do to make this quieter?
Logged

cuivenion

  • Sr. Member
  • ****
  • Posts: 73
    • View Profile
Re: Quiet EQMOD Slews, Loud GOTO's
« Reply #1 on: March 05, 2016, 05:50:49 »

Scratch that. Apparently 800x goto is much quieter so I'll just use that.
Logged

TCWORLD

  • Administrator
  • *****
  • Posts: 809
    • View Profile
    • AstroEQ
Re: Quiet EQMOD Slews, Loud GOTO's
« Reply #2 on: March 05, 2016, 15:06:37 »

Hi,

Just the natural sound of stepper motors. They do like to hum and click. When everything is mounted and there is a load on the shaft it may get a little quieter, but the good thing about astro stuff is sound pollution doesn't affect the pictures/viewing.

It will be louder on Go-To movements as the motors are switched into a larger ustep mode (e.g. they go from 1/32 in slew to 1/4 in goto). This is done to achieve a higher torque so higher speed movements can be performed.
Logged
Tom Carpenter (AstroEQ)