Welcome, Guest. Please login or register.

Username: Password:

Author Topic: Autoguiding  (Read 3875 times)

ultramol

  • Jr. Member
  • **
  • Posts: 9
    • View Profile
Autoguiding
« on: August 08, 2016, 15:17:26 »
Hello there, can anyone tell me if this will work
1 Guide camera plugged in to PC
2 Astroeq plugged into motors and PC
3 PC running PHD2, EQmod, CdeC
Do I need anything else to attempt to autoguide. I am a bit confused as to what else I may need, if anything. I keep coming across ST4 connectors to serial, ST4 to usb and I am not sure as to what to do. I am hoping AstroEQ will be right for the task of moving the motors during guiding.
Thanks for your help
Regards.....Geoff
Logged

TCWORLD

  • Administrator
  • *****
  • Posts: 809
    • View Profile
    • AstroEQ
Re: Autoguiding
« Reply #1 on: August 09, 2016, 05:57:20 »
Hi Geoff,

No need for ST4. PHD2 sends its guide commands to AstroEQ via EQMOD, thus eliminating the need for an extra ST4 device.

Tom.
Logged
Tom Carpenter (AstroEQ)

ultramol

  • Jr. Member
  • **
  • Posts: 9
    • View Profile
Re: Autoguiding
« Reply #2 on: August 09, 2016, 07:25:51 »
Thanks Tom. I will now attempt to use guiding to better my imaging.
Logged