Welcome, Guest. Please login or register.

Username: Password:

Author Topic: K150 programmer  (Read 2462 times)

kaito83

  • Full Member
  • ***
  • Posts: 47
    • View Profile
K150 programmer
« on: August 12, 2016, 11:28:19 »
Hi All!

My programmer doesnt support the PIC18F14K50-I/P my question is what kind of PIC should I use.
Logged

TCWORLD

  • Administrator
  • *****
  • Posts: 809
    • View Profile
    • AstroEQ
Re: K150 programmer
« Reply #1 on: August 12, 2016, 15:00:43 »
There is no other choice of through-hole PIC which supports USB.

You can if you want use one of the FT232RL breakout boards that are available from places like Sparkfun. If you use one of those, go for the 5V output version. Connect the DTR or RTS pins (either will do) to where Pin 9 of the PIC is shown to go in the schematic.
Logged
Tom Carpenter (AstroEQ)

kaito83

  • Full Member
  • ***
  • Posts: 47
    • View Profile
Re: K150 programmer
« Reply #2 on: August 16, 2016, 08:16:09 »
Thank You !
Logged