Welcome, Guest. Please login or register.

Username: Password:

Author Topic: MS pins for DEC stepper  (Read 3311 times)

GigiG

  • Full Member
  • ***
  • Posts: 28
    • View Profile
MS pins for DEC stepper
« on: January 12, 2015, 20:43:27 »
Hi, I realized just now that the 1-2-3 MS pins of the DEC driver in the schematic are swapped with respect to the Mega ones. I suppose that the definition in PinMappings.h, MS0-pin20, MS1-pin19, MS2-pin18 is the corrent one, right?
Gigi
Logged

TCWORLD

  • Administrator
  • *****
  • Posts: 809
    • View Profile
    • AstroEQ
Re: MS pins for DEC stepper
« Reply #1 on: January 12, 2015, 22:32:45 »
I need to post a corrected schematic, will do that when I get a spare moment. Follow the labels in the schematic, not the lines! (Not sure quite how I managed to get the lines wrong when the labels are correct).

EDIT:
I've updated the schematic in the "Arduino Block Schematic - Converted from Tom's Eagle file to PDF" Thread. I've also uploaded it to the build your own AstroEQ tutorial page.
« Last Edit: January 12, 2015, 23:02:59 by TCWORLD »
Logged
Tom Carpenter (AstroEQ)