Welcome, Guest. Please login or register.

Username: Password:

Author Topic: No voltage coming out of the DEC  (Read 2207 times)

AradoKYSky

  • Full Member
  • ***
  • Posts: 33
    • View Profile
No voltage coming out of the DEC
« on: February 04, 2018, 01:39:51 »

Hello,

I have been enjoying the AstroEQ product as I build a custom GOTO device for my mount (Celestron SP-C6) . My problem is that the DEC has stopped working. No voltage seems to be coming out of the Dec port using a VOM (Fluke). The RA works perfectly. I have full connectivity across all wiring. And wiring matches RJ-11 specs and meets the Stepper motors wiring needs. EQMOD and ASTROEQConfig show the system operational. But the DEC seems dead. Anything else I could check?
Logged

AradoKYSky

  • Full Member
  • ***
  • Posts: 33
    • View Profile
Re: No voltage coming out of the DEC
« Reply #1 on: February 04, 2018, 02:03:08 »

Hello,

I have it figured out. I used the instructions to set the amps to determine if the pots needed adjustments. It is working now.
Logged

AradoKYSky

  • Full Member
  • ***
  • Posts: 33
    • View Profile
Re: No voltage coming out of the DEC
« Reply #2 on: February 08, 2018, 01:21:20 »

Hello,

I am wondering about the pots. I am getting funny numbers when checking for Volts. 0.00, 12.98, 1.68 are some of the readings. I am using a Fluke 179 to test with. The RA works. Then it doesn't. The DEC does not come on.
Logged

AradoKYSky

  • Full Member
  • ***
  • Posts: 33
    • View Profile
Re: No voltage coming out of the DEC
« Reply #3 on: February 19, 2018, 23:36:47 »

Hello,

The driver was replaced for the DEC.
Logged

AradoKYSky

  • Full Member
  • ***
  • Posts: 33
    • View Profile
Re: No voltage coming out of the DEC
« Reply #4 on: February 20, 2018, 19:29:24 »

Hello,

Found the other culprit. A bad RJ-11 cable was the real problem. I bought two new ones. When I set it up with the new chord, problem was solved.
Logged