Welcome, Guest. Please login or register.

Username: Password:

Author Topic: H/C Power  (Read 2032 times)

AradoKYSky

  • Full Member
  • ***
  • Posts: 33
    • View Profile
H/C Power
« on: February 20, 2018, 19:30:50 »
Hello,

What is the purpose of the H/C Power port? What can be attached to this port? Thank you.
Logged

TCWORLD

  • Administrator
  • *****
  • Posts: 809
    • View Profile
    • AstroEQ
Re: H/C Power
« Reply #1 on: February 20, 2018, 19:40:30 »
It's a 12V output (connects basically directly to the 12V input, though through the reverse polarity diode). The idea was it could be used to power a hand-controller if I ever get that far.
There is also a current limited PWM output (open-drain) designed to be used to drive something like a polarscope LED. But I haven't gotten around to implementing that in software yet.
Logged
Tom Carpenter (AstroEQ)

AradoKYSky

  • Full Member
  • ***
  • Posts: 33
    • View Profile
Re: H/C Power
« Reply #2 on: February 21, 2018, 01:47:34 »
Hello Tom,

Thank you for the information. After I sent the question, H/C was hand controller power. I was hoping for a Bluetooth FM receiver type device to add Bluetooth. 12V is not friendly to these types of devices.
Logged