Print

[ecc2000]

Good evening,

How do we use AVRISP MKII?

What software is needed?

Pierre

[ecc2000]

Hello,

Some Tom news for the bootloader.

Obviously I managed to get it into 162!

I mounted it on a diy astroeq and it works !!!!!!!

However, you have to restart eqmod twice in the utility, otherwise it won't start!

In the sky chart the telescope moves very quickly will point very quickly in declination but is very very slow in ascent to finish its race and I cannot go faster if not I block the engine, it is not normal, it seems that there is a bad communication or relation between chart of the sky and eqmod or between chart of the sky and the utility, I don't know ?? !!

Thank you

Pierre

[ecc2000]

Hello,

Why do I have to restart Eqmod twice at the end of the configuration for it to work?

I have version 3.9.2, I reloaded Ascom and Eqmod, but nothing helps, it worked well with the Mega2560!

Otherwise for the goto it's bad it looks like there are communication problems with the sky map.

From the moment when the engine is running, I suppose that the bootloader is well fitted?

Thanks for the info, sometimes I feel like I'm talking to myself and no answers yet there are a lot of regulars here!

Thank you

Pierre

[ecc2000]

Good evening,

Everything works, but I ask my question again!

Eqmod opens at the end of the configuration but the star is crossed with a red line and it is noted timeout in eqmod!

If I relaunch Eqmod a second time in the utility there it works, I would like to have help because I only miss this problem to solve!

thank you so much

Pierre

[ecc2000]

Hello,

The trials continue!

Goto with sky map ok!

On the other hand when I simulate the port ST4, a contact of pin 32 with the ground accelerates the engine well but it remains accelerated at the speed 0,25x!

The other three pins work well, what should I do?

Is there a special configuration in Eqmod that can solve the problem?

Thank you

Pierre