Welcome, Guest. Please login or register.

Username: Password:

Author Topic: DRV8834 Tracking Issue  (Read 1773 times)

ntk.thava

  • Newbie
  • *
  • Posts: 4
    • View Profile
DRV8834 Tracking Issue
« on: July 11, 2020, 16:21:14 »
I am facing an intermittent tracking problem with my DYI ASTROEQ  using the DRV8834.
In order to achieve the 1/4 and    1/32 step, I did not connect M0 in order to let it float. When I track, at times the tracking is ok but some times the RA moves faster and some times it moves slower. Could this be a result of not connecting the M0?


Looking forward to hear form anyone.

Thank you.
Logged

ecc2000

  • Sr. Member
  • ****
  • Posts: 72
    • View Profile
Re: DRV8834 Tracking Issue
« Reply #1 on: July 11, 2020, 16:48:33 »
Hello,

All the information on this is here:

https://www.pololu.com/product/2134

Pierre
Logged

ntk.thava

  • Newbie
  • *
  • Posts: 4
    • View Profile
Re: DRV8834 Tracking Issue
« Reply #2 on: July 11, 2020, 17:59:47 »
Thanks for your swift reply.
I have went through it.

As for using the DRV8825 , is the fast decay needed to be tied to 5V to have a stable tracking?
Logged

ecc2000

  • Sr. Member
  • ****
  • Posts: 72
    • View Profile
Re: DRV8834 Tracking Issue
« Reply #3 on: July 11, 2020, 20:00:25 »
???

Just connect the 8825 as shown in the diagram and there is no problem, just adjust the current for the stepper motor correctly !

Pierre
Logged

ntk.thava

  • Newbie
  • *
  • Posts: 4
    • View Profile
Re: DRV8834 Tracking Issue
« Reply #4 on: July 12, 2020, 13:30:00 »
Many thanks !
Logged