Welcome, Guest. Please login or register.

Username: Password:

Author Topic: AstroEQ, with AstroBerry Strange Behaviour.  (Read 1079 times)

astrochemist

  • Newbie
  • *
  • Posts: 4
    • View Profile
AstroEQ, with AstroBerry Strange Behaviour.
« on: January 31, 2021, 11:01:35 »

Hi,

I  have notice strange behaviour with the AstroEQ Arduino Mega and Astroberry Pi:

If I have the Astroeq powered up and plugged in to the Pi, the Pi will not boot past post. As soon as I unplug the USB cable it boots normally.

Also the Pi will draw about 100 mA from the AstroEQ via the usb cable. This would sometimes make the Pi crash. I have solved this by cutting the red wire in the USB cables.

Anybody else see this behaviour?

Logged