Welcome, Guest. Please login or register.

Username: Password:

Author Topic: Plastic brackets and Hot motors  (Read 896 times)

Marshad

  • Newbie
  • *
  • Posts: 3
    • View Profile
Plastic brackets and Hot motors
« on: May 08, 2022, 16:54:00 »

Hi all
Testing the nema 14 motors recommended by Tom (https://www.omc-stepperonline.com/nema-14-bipolar-1-8deg-18ncm-25-5oz-in-0-8a-5-4v-35x35x34mm-4-wires-14hs13-0804s), but they are getting very hot.
Before I attach to 3d printed plastic brackets, I think I need to adjust the current.
Am I correct that with a rated current of 0.8A, I need to adjust the potentiometers to arrive at a reference voltage of 0.4v?
Has anyone tried these with plastic brackets without current adjustment?

David
Logged

jslight

  • Full Member
  • ***
  • Posts: 27
    • View Profile
Re: Plastic brackets and Hot motors
« Reply #1 on: June 20, 2022, 19:59:42 »

Logged