Welcome, Guest. Please login or register.

Username: Password:

Author Topic: AstroEQ with a fork mount?  (Read 7444 times)

DavidG

  • Newbie
  • *
  • Posts: 1
    • View Profile
AstroEQ with a fork mount?
« on: October 22, 2014, 23:39:28 »
Hi,

Does the AstroEQ support a fork mount (no meridian flip routine) ?

If not, are there any plans to possibly implement this in the next firmware? EQMOD in itself does not support a fork mount, but it would open many new opportunities if you can implement this - and I would buy one as soon as it is available :).

Thanks,
-David
Logged

TCWORLD

  • Administrator
  • *****
  • Posts: 809
    • View Profile
    • AstroEQ
Re: AstroEQ with a fork mount?
« Reply #1 on: October 23, 2014, 14:58:40 »
Hi David,

AstroEQ is pretty much at the mercy of EQMOD, it moves where it is told. I'm not entirely sure of the differences between what EQMOD will make a fork mount do and what it actually needs to do, and then on top of that I am not sure if it would be possible to get the mount to move in a way EQMOD was not expecting whilst still making it think it is in the right place.
Logged
Tom Carpenter (AstroEQ)

0barry0

  • Newbie
  • *
  • Posts: 1
    • View Profile
Re: AstroEQ with a fork mount?
« Reply #2 on: February 12, 2018, 18:46:15 »
I know this is a very old post but you may still be interested. Have a look at this link it looks like these folks have done a patch for EQMOD to lock the pier, to prevent a meridian flip. In the meantime I intend to try this with my home grown fork mount using the Astro EQ and EQMOD.

http://www.eqdrive.com.ua/?page_id=2030
Logged

pedromferreira

  • Newbie
  • *
  • Posts: 1
    • View Profile
Re: AstroEQ with a fork mount?
« Reply #3 on: September 11, 2019, 13:21:32 »
Hi DavidG, has you success in trying to use AstroEQ to control a fork mount? I would like to control a Dobsonian mount in an equatorial wedge with AstroEQ.
Logged