AstroEQ Discussion Board
Main Site
Home
Help
Search
Login
Register
Welcome,
Guest
. Please
login
or
register
.
Username:
Password:
AstroEQ Discussion Board
>
AstroEQ Forum
>
Mount Support
>
NEMA 17 Motor
« previous
next »
Pages: [
1
]
Print
Author
Topic: NEMA 17 Motor (Read 4834 times)
rvaneynd
Full Member
Posts: 29
NEMA 17 Motor
«
on:
October 24, 2015, 13:32:55 »
Tom,
I need some advice regarding the step motors.
You mention here to use either NEMA 11 or 14 motors. I have 2 NEMA 17 motors with a rate current of 1.8A per phase.
Will these work it is the 1704 model on this page:
http://jkongmotor.en.made-in-china.com/product/pvdJZFXCiRks/China-Jk42hs40-1704-NEMA-17-3D-Printer-Stepper-Motor-42mm-Reprap-Motor.html
?
Raoul
«
Last Edit: October 24, 2015, 14:01:07 by rvaneynd
»
Logged
TCWORLD
Administrator
Posts: 809
Re: NEMA 17 Motor
«
Reply #1 on:
October 24, 2015, 22:30:04 »
You can use NEMA17's if you want, 14 and 11 were purely based on size. One thing to be aware though, the current rating must be less than 1.2A/phase. Also based on another thread you probably want a motor with a rated voltage between 6 and 12V.
Logged
Tom Carpenter (AstroEQ)
rvaneynd
Full Member
Posts: 29
Re: NEMA 17 Motor
«
Reply #2 on:
October 25, 2015, 11:52:11 »
Tom,
Thank you. I better get some other ones as the ones I have are 1.8A per phase.
Raoul
Logged
mrtaylor
Newbie
Posts: 2
Re: NEMA 17 Motor
«
Reply #3 on:
October 12, 2016, 13:40:32 »
hi,
if i wanted to use nema 17 over nema 14 motors, what would be the benefit?
and also would that mean the pullies and belts would have to change also?
if nema 17 motors are better, would these do the job?
http://uk.stepperonline.com/nema-17-bipolar-stepper-12v-04a-40ncm567ozin-17hs150404s-p-14.html
cheers
michael t
Logged
Print
Pages: [
1
]
« previous
next »
AstroEQ Discussion Board
>
AstroEQ Forum
>
Mount Support
>
NEMA 17 Motor