Welcome, Guest. Please login or register.

Username: Password:

Author Topic: DIY Astroeq  (Read 3400 times)

Tomzera

  • Newbie
  • *
  • Posts: 2
    • View Profile
DIY Astroeq
« on: November 25, 2015, 16:25:44 »
Hello all,

I am attempting to build my own controller. I not experienced in PCB building yet, Can anyone show me the drill holes for the components on the PCB etch supplied.  Thanks Tomzera
Logged

TCWORLD

  • Administrator
  • *****
  • Posts: 809
    • View Profile
    • AstroEQ
Re: DIY Astroeq
« Reply #1 on: November 25, 2015, 16:34:06 »
Hi Tomzera,

There is a file named "AstroEQ-DIY-Holes.pdf" supplied with the DIY design. This shows the location of all the holes.

You should be able to drill most of them with a 1mm bit, though ideally a 0.8mm bit should be used for the USB port. The large mount holes will need a 3.2mm bit, as will the ones for the 12V socket and RJ11 support holes. The USB mount holes are 2mm.

Hope that helps.
Logged
Tom Carpenter (AstroEQ)

Tomzera

  • Newbie
  • *
  • Posts: 2
    • View Profile
Re: DIY Astroeq
« Reply #2 on: November 25, 2015, 18:52:13 »
Thank you very much
Logged