Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
1
AstroEQ Support / Re: Compatibility problems EQMOD v200
« on: June 21, 2020, 19:41:46 »
Cool, thanks Tom, It'll give me a place to start.
I mean that neither EQASCOM_Run nor the Toolbox can see Astro-EQ...I tried to on every port (all 16) and no communication between EQASCOM and Astro EQ. Yes I DL'd the newest Config Utility and firmware. It works fine...connects on Com 8 every time, but when I finish it won't even go into Test mode because EQASCOM cant find the Port. It just shows "No Com Port Available (or Found)" I dont remember what the status light was doing...I re installed a special V1.29a that Chris (EQMOD) made for me and it workds fine but I don't get all the new whizzbangs in V2.00.
thanks,
Rick
What do you mean by "EQMOD can't find any ports"? I presume you've set up the EQMOD settings and selected which COM port it should be using?
I mean that neither EQASCOM_Run nor the Toolbox can see Astro-EQ...I tried to on every port (all 16) and no communication between EQASCOM and Astro EQ. Yes I DL'd the newest Config Utility and firmware. It works fine...connects on Com 8 every time, but when I finish it won't even go into Test mode because EQASCOM cant find the Port. It just shows "No Com Port Available (or Found)" I dont remember what the status light was doing...I re installed a special V1.29a that Chris (EQMOD) made for me and it workds fine but I don't get all the new whizzbangs in V2.00.
thanks,
Rick
2
AstroEQ Support / Re: Compatibility problems EQMOD v200
« on: June 21, 2020, 10:47:50 »
Hellooo.....anybody home?
3
AstroEQ Support / Compatibility problems EQMOD v200
« on: June 20, 2020, 13:30:29 »
I'm reposting this here in hopes someone sees it.
.
Hi Tom,
I'm having a compatibility issue with EQMOD V200 still. I've downloaded the latest Config. Utility and drivers but it still won't connect. EQMOD can't find any ports to the controller even though I can communicate with the controller through the Config Utility. I don't know if it makes a difference or not but I have one of the first AstroEQ's that you sold with the Black Case (ca. 2016) and am still running it on Win 7 with EQMOD V1.29a(which works perfectly) I haven't used it in a few years because I got some new Toys that didn't need it but I have a hanker'n to use my old Vixen Super Polaris again.
many thanks,
Rick
Edit: Chris over at EQMOD modified me a special version of 1.29 to overcome some of my mount issues so I can use it but would love to be able to upgrade to V200 (also a special version he modded for me) at some point
.
Hi Tom,
I'm having a compatibility issue with EQMOD V200 still. I've downloaded the latest Config. Utility and drivers but it still won't connect. EQMOD can't find any ports to the controller even though I can communicate with the controller through the Config Utility. I don't know if it makes a difference or not but I have one of the first AstroEQ's that you sold with the Black Case (ca. 2016) and am still running it on Win 7 with EQMOD V1.29a(which works perfectly) I haven't used it in a few years because I got some new Toys that didn't need it but I have a hanker'n to use my old Vixen Super Polaris again.
many thanks,
Rick
Edit: Chris over at EQMOD modified me a special version of 1.29 to overcome some of my mount issues so I can use it but would love to be able to upgrade to V200 (also a special version he modded for me) at some point
4
AstroEQ Support / Re: [Resolved] EQMOD V2.00 Compatibility Issues with AstroEQ
« on: June 17, 2020, 17:34:14 »
Hi Tom,
I'm having a compatibility issue with EQMOD V200 still. I've downloaded the latest Config. Utility and drivers but it still won't connect. EQMOD can't find any ports even though I can communicate with the controller through the Utility. I don't know if it makes a difference or not but I have one of the first AstroEQ's that you sold and am still running it on Win 7 with EQMOD V1.29a(which works perfectly) I haven't used it in a few years because I got some new Toys that didn't need it but I have a hanker'n to use my old Vixen Super Polaris again.
many thanks,
Rick
Edit: Chris over at EQMOD modified me a special version of 1.29 to overcome some of my mount issues so I can use it but would love to be able to upgrade to V200 (also a special version he modded for me) at some point
I'm having a compatibility issue with EQMOD V200 still. I've downloaded the latest Config. Utility and drivers but it still won't connect. EQMOD can't find any ports even though I can communicate with the controller through the Utility. I don't know if it makes a difference or not but I have one of the first AstroEQ's that you sold and am still running it on Win 7 with EQMOD V1.29a(which works perfectly) I haven't used it in a few years because I got some new Toys that didn't need it but I have a hanker'n to use my old Vixen Super Polaris again.
many thanks,
Rick
Edit: Chris over at EQMOD modified me a special version of 1.29 to overcome some of my mount issues so I can use it but would love to be able to upgrade to V200 (also a special version he modded for me) at some point
Pages: [1]