This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

1

AstroEQ Availability / Re: ICs/PCB Availability [Currently Available]

« on: April 15, 2018, 10:51:34 »

I'm still waiting for the order... How long should it come to me? 2 weeks have passed...

2

AstroEQ Availability / Re: ICs/PCB Availability [Currently Available]

« on: March 26, 2018, 07:27:14 »

I order two sets of ICs...  Thanks

BR

3

Hardware Development / Re: AstroEQ Basic Hand Controllers

« on: February 23, 2018, 18:32:58 »

Hi, this is my version of hand controller:


Everything work fine

BR

4

AstroEQ Availability / Re: AstroEQ Availability [Currently Unavailable]

« on: November 17, 2017, 07:49:35 »

I took the shipment, everything is fine

Thanks
BR

5

AstroEQ Availability / Re: AstroEQ Availability [Currently Unavailable]

« on: November 16, 2017, 17:32:58 »

Now I checked and showed me this:

Updated on: Wednesday 15 November
07:08pm
UNDELIVERED INCORRECT ADDRESS BULGARIA


I ordered before, and everything arrived on time... tomorrow i'll check in local post office...

BR

6

AstroEQ Availability / Re: AstroEQ Availability [Currently Unavailable]

« on: November 16, 2017, 13:12:53 »

Hi Tom, i'm still waiting, did you send my order?

BR

7

General Discussion / Re: 3d printer nema 17 brackets sp/gp/eq5

« on: November 14, 2017, 09:58:29 »

Or just buy this: https://www.ebay.com/itm/Alloy-Steel-Mounting-bracket-for-42mm-NEMA-17-stepper-motor-with-Screws-NQ1/112469963629?epid=1558446679&hash=item1a2fbb736d:g:Ih0AAOSwjk9ZXJTe
 they fit perfect with Nema17:
I 3d printed my clamps for guider, and everything work fine..

BR

8

AstroEQ Availability / Re: AstroEQ Availability [Currently Unavailable]

« on: November 05, 2017, 14:22:36 »

Hi, i want to buy one full assembled AstroEQ controller... I payed through paypal...

Thanks
BR

9

Mount Support / Re: What are the settings for Skywatcher EQ5 with dual axis motor kit

« on: April 07, 2017, 20:10:58 »

Sorry for delay, everything works fine... In config utility i set DEC to reverse... Here is a test on moon : https://www.youtube.com/watch?v=Susj6T9cqE4

 BR:)

10

Mount Support / Re: What are the settings for Skywatcher EQ5 with dual axis motor kit

« on: February 04, 2017, 17:19:45 »

I give up.... this is the most complicated GoTo system ever.... Does anyone have idiots guide?

11

Mount Support / Re: What are the settings for Skywatcher EQ5 with dual axis motor kit

« on: February 04, 2017, 10:10:15 »

Even with poor polar alingment, i tried to point the Sun, but it points to the ground...

12

Mount Support / Re: What are the settings for Skywatcher EQ5 with dual axis motor kit

« on: February 04, 2017, 09:26:39 »

Tracks fine exactly 9.58m, but points another place in sky... In EQMOD what mean:  PierSide: West, pointing East

13

Mount Support / What are the settings for Skywatcher EQ5 with dual axis motor kit

« on: February 04, 2017, 08:32:30 »

What are the settings for Skywatcher EQ5 with dual axis motor kit? My mount is this: http://www.astroshop.eu/equatorial-without-goto/skywatcher-mount-neq-5/p,16081 , motors are these: http://www.astroshop.eu/drive-motors-without-goto/skywatcher-eq-5-engine-set-ra-and-de/p,1500
In config utility i load eq5-skywatcher.conf and in CDC the offset is in the opposite direction. I tried to reverse each axis or both, and everytime scope points at diffrent places. In CDC shows exactly selected object, but physicaly point with large displacement...

Sorry for my English
BR

14

DIY AstroEQ / Re: Connect Error

« on: January 30, 2017, 21:41:55 »

EQASCOM_V129a  and  ASCOMPlatform62

15

DIY AstroEQ / Re: Connect Error

« on: January 30, 2017, 20:43:44 »

Yesss, thanks for the fast help... 

BR